Table of Contents
Advertisement
If engine is not started within 60 seconds since the
button was first pressed, the low and high beam
lights are turned off.
If the low beam or high beam was turned on before
starting the engine (with the procedure described
above), the headlight turns off automatically when
starting the engine and will turn on again when the
engine has been completely started to save the
battery charge.
Turn indicators
Turn indicator automatic reset is controlled by the
instrument panel.
After activating one of the two turn indicators, user
can reset them using the button (3, Fig 76) on the left
switch.
If the turn indicator is not reset manually, the
instrument panel will automatically switch it off after
the motorcycle has traveled 0.3 miles (500 m) from
when the turn indicator was activated. The counter
for the distance traveled for automatic deactivation is
only activated at speeds below 50 mph (80 km/h).
If the calculation of the distance for automatic
deactivation is activated and then the motorcycle
exceeds a speed of 50 mph (80 km/h), the calculation
is interrupted and will restart when the speed returns
below the indicated threshold.
151
Advertisement
Table of Contents
