By turning adjusters (1) and (3) you will hear some
clicks; each click corresponds to a damping setting.
The stiffest damping setting is obtained with the
adjuster turned fully clockwise to the "0" position.
By turning counter clockwise starting from this
position, count the clicks that will correspond to
positions "1", "2" etc..
STANDARD factory setting is as follows:
-
compression: 11 clicks (from fully closed);
-
rebound: 7 clicks (from fully closed);
-
spring preload: 5 turns (from fully unloaded).
Attention
Regulate the spring preload adjuster on both
legs to the same positions.
187