Table of Contents
Advertisement
Press buttons (1) and (2) to highlight stored LAPs one
by one; in particular: use button (2) to view next lap,
or use button (1) to view previous lap.
To exit the menu and go back to previous page, select
EXIT and press button (4).
Note
The MAX stored speed is the one shown on the
display (increased by 5%).
Note
If the MAX speed reading exceeds 186 mph
(299 Km/h) while the information is stored, the speed
that was reached is still displayed (example: 196 mph
(316 km/h).
Note
If there is no reading in the memory, the
30 times are shown, with the display showing "-.--.-",
MAX rpm = 0 and MAX speed = - - -.
Note
If while recording the LAP the engine reaches
the threshold that precedes the rev limiter or rev
limiter threshold, the relevant Over_Rev light will turn
on when displaying the stored times.
123
Advertisement
Table of Contents
