Front brake lever
Pull in the lever (1) towards the twistgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently.
The control lever features a dial adjuster (2) for lever
distance from the twistgrip on handlebar adjustment.
To adjust it, keep lever (1) fully extended, and turn dial
adjuster (2) to set it to one of the four available
positions. Keep in mind that the position no. 1
corresponds to the maximum distance between the
lever and the handgrip, whereas position no. 4
corresponds to the minimum distance.
Attention
Before using these controls, thoroughly read
instructions under "Moving off".
Attention
Set front brake lever when motorcycle is
stopped.
2
1
Fig 90
169