Table of Contents
Advertisement
Customizing the Riding Mode: storing
settings
After changing a Riding Mode parameter (ENGINE,
DTC and/or ABS), to make the change effective, it is
necessary to save it before quitting the customization
menu.
It is possible to save the parameters set for each
riding mode.
To save the parameter settings of a Riding Mode it is
necessary to gain access to the SETTING MENU, use
buttons (1) and (2) to select the message R.M. (Riding
Mode) and press button (4). Use buttons (1) and (2)
to select the riding mode you wish to edit, then press
button (4). Then use buttons (1) and (2) to select
"MEMORY" (flashing) and keep button (4) pressed for
2 seconds; then the display will show "WAIT" (for 2
other seconds) followed by "MEM" and "OK" to
confirm that the new parameters have been
memorized.
102
Any parameter change made is saved and remains in
the memory also after a Battery-Off. If you highlight
"EXIT" and press button (4) you exit the sub-menu and
go back to previous page.
Attention
Changes should only be made to the
parameters by people who are experts in motorcycle
setup; If the parameters are changed accidentally,
use the "DEFAULT" function to reset the parameters.
Advertisement
Table of Contents
