Table of Contents
Advertisement
Instrument Panel (Dashboard)
Display settings and functions
1) Display.
2) NEUTRAL LIGHT N (GREEN).
Comes on when in neutral position.
3) HIGH BEAM LIGHT
Turns on to indicate that the high beam lights are on
and when the flasher is activated.
4) ENGINE OIL PRESSURE LIGHT
Comes on when engine oil pressure is too low. It
must turn on at "KEY-ON", but must turn off a few
seconds after the engine has started. May come on
briefly when the engine is hot, but should go off as
the engine revs up.
Important
If the ENGINE OIL light stays on, stop the
engine or it may suffer severe damage.
5) FUEL WARNING LIGHT
34
(BLUE).
(RED).
(AMBER YELLOW).
Turns on when fuel is low and there are about 0.66
gallons (2.5 liters) of fuel left in the tank.
6) TURN INDICATOR LIGHTS
A warning light turns on and blinks when the relevant
turn indicator is active; when the warning lights blink
at the same time, the HAZARD function is active.
7) "ENGINE/VEHICLE DIAGNOSIS - EOBD" LIGHT
(AMBER YELLOW).
Turns on in the case of "engine" and/or "vehicle" errors
and in some cases will lock the engine.
8) GENERAL WARNING LIGHTS (RED).
the lights (8a) turn on when RPM value reaches the
first threshold before the rpm limiter kicks in;
the lights (8b) turn on when RPM value reaches the
second threshold before the rpm limiter kicks in;
(GREEN).
Advertisement
Table of Contents
