Installing The Front Wheel (Disc) - Yamaha XT250X Service Manual

f. Repeat steps (d) through (f) several times un-
til all the marks come to rest at the same spot.
g. The spot where all the marks come to rest is
the front wheel's heavy spot "X".
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
3. Adjust:
Front wheel static balance
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Install a balancing weight "1" onto the rim ex-
actly opposite the heavy spot "X".
NOTE:
Start with the lightest weight.
b. Turn the front wheel 90° so that the heavy
spot is positioned as shown.
c. If the heavy spot does not stay in that posi-
tion, install a heavier weight.
d. Repeat steps (b) and (c) until the front wheel
is balanced.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
4. Check:
Front wheel static balance
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Turn the front wheel and make sure it stays at
each position shown.
b. If the front wheel does not remain stationary
at all of the positions, rebalance it.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS22000

INSTALLING THE FRONT WHEEL (DISC)

The following procedure applies to both of the
brake discs.
1. Install:
Front brake disc
G
Refer to "CHECKING THE FRONT BRAKE
DISC" on page 4-17.
2. Lubricate:
Front wheel axle
G
Oil seal lips
G
Recommended lubricant
Lithium-soap-based grease
3. Tighten:
Front wheel axle nut "1"
G
4-6
FRONT WHEEL
1