Yamaha XT250X Service Manual page 148

Removing the shift pedal assembly and leads and hoses
2
6
10 Nm (1.0 m kg, 7.2 ft
•
Order Job/Parts to remove
Carburetor
Drive sprocket
Starter motor
1 Cylinder head breather hose
2 Spark plug cap
3 Clutch cable
4 Pickup coil coupler/stator assembly coupler
5 Speed sensor coupler
6 Horn
7 Shift pedal assembly
8 Neutral switch lead
1
Ib)
•
10 Nm (1.0 m kg, 7.2 ft Ib)
• •
5-2
ENGINE REMOVAL
10 Nm (1.0 m
3
7
Q'ty
Refer to "CARBURETOR" on page 6-3.
Refer to "CHAIN DRIVE" on page 4-57.
Refer to "ELECTRIC STARTER" on page
5-50.
1 Disconnect.
1 Disconnect.
1 Disconnect.
1/1 Disconnect.
1 Disconnect.
1
1
1 Disconnect.
For installation, reverse the removal proce-
dure.
kg, 7.2 ft Ib)
• •
5
4
10 Nm (1.0 m kg, 7.2 ft
• •
8
30 Nm (3.0 m kg, 22 ft
• •
Remarks
Ib)
Ib)