Starting Circuit Cut-Off System Operation - Yamaha XT250X Service Manual

EAS27180

STARTING CIRCUIT CUT-OFF SYSTEM OPERATION

If the engine stop switch is set to "
starter motor can only operate if at least one of the following conditions is met:
The transmission is in neutral (the neutral switch is closed).
G
The clutch lever is pulled to the handlebar (the clutch switch is closed) and the sidestand is up (the
G
sidestand switch is closed).
The starting circuit cut-off relay prevents the starter motor from operating when neither of these condi-
tions has been met. In this instance, the starting circuit cut-off relay is open so current cannot reach the
starter motor. If any of the above has occurred and if the starting circuit cut-off relay is turned ON, you
can start the engine by pressing starter switch "
ELECTRIC STARTING SYSTEM
" and the main switch is set to "ON" (both switches are closed), the
".
14
13
12
1
2
3
4
5
6
b
7
7-7
11
10
9
8
a