Pc Card Backup Error Messages - NEC DS2000 Hardware Manual

Backing Up Site Data
9. Press HOLD .

PC Card Backup Error Messages

NO PCCARD
ERASE FAILED
SAVE FAILED
P/N 85880
5-2 N Section 5: Maintenance Options and SMDR
Normally, you see
9906: SAVING . . . . . . . . .
The PC Card Active LED is on during backup.
If the address you choose already has data stored in it, you see: REPLACE DB nn Y/N .
- Press N + HOLD to back up to step 5.
- Press Y + HOLD to proceed.
You automatically exit programming when the upload completes.
PC Card Backup Error Messages
This error message:
Mode Switch
PC Card Active
LED
Figure 5-1: Using the PC Card
Means this:
The PC card is not installed. Install the PC
card and try again.
The system could not overwrite an existing
data base on the PC card. Repeat the proce-
dure. If you get the message again, try another
PC card.
The system could not save data to the PC card.
Repeat the procedure. If you get the message
again, try another PC card.
DS2000 Hardware Manual