YASKAWA V1000 Installation Manual page 25

11.
Remove the option cover and pass the ground wire through the inside of the drive
bottom cover and into the through-hole for the ground wire at the front of the option.
Figure 15
V1000
12.
Attach the option to the drive. Properly seat the tabs on the left and right sides of the
option to the drive case.
Figure 16
YASKAWA ELECTRIC TOBP C730600 59A V1000 Option Modbus TCP/IP Installation Manual
Option Cover
Figure 15 Ground Wire Routing
V1000
Line up tabs
Line up tabs
Figure 16 Connect the Option
5 Installation Procedure
EN 25