YASKAWA V1000 Installation Manual page 18

5 Installation Procedure
Figure 4
V1000
2.
The remaining installation steps differ based on drive model. Find the drive model
number on the drive nameplate and refer to the step indicated in
your model number.
Enclosure Type
IP20/Open-Chassis
IP20/NEMA Type 1
<1> Installing the option on an IP20/NEMA Type 1 enclosure drive voids NEMA Type 1 protection while maintaining
IP20 conformity.
3.
For IP20/Open-Chassis models CIMR-VAB, Remove the bottom cover
of the drive by applying pressure to the tabs on each side of the bottom cover. Pull
the bottom cover away from the drive while pushing in on the tabs to release the
cover from the drive. Refer to
Refer to Figure 6
2A0069B, and 4A0001B to 4A0038B, which require removing the terminal cover
prior to removing the bottom cover.
Figure 5
Figure 5 Remove the Bottom Cover on an IP20/Open-Chassis Drive
(Models CIMR-VBA0001B to BA0003B and 2A0001B to 2A0006B)
EN 18
Figure 4 Remove Front Cover
Table 5 Installation Steps Based on Drive Model
Drive Model
CIMR-VAB
CIMR-VAF
<1>
for drive models CIMR-VBA0006B to BA0018B, 2A0008B to
YASKAWA ELECTRIC TOBP C730600 59A V1000 Option Modbus TCP/IP Installation Manual
Figure 5 for details.
V1000
Table 5
Proceed to Step
3.
6.
based on
Page
18
20