YASKAWA V1000 Installation Manual page 19

Figure 6
V1000
Terminal Cover
on an IP20/Open-Chassis Drive (Models CIMR-VBA0006B to BA0018B;
4.
On IP20/Open-Chassis models, connect the drive side of the ground wire to the
drive ground terminal.
Note: The four different ground wires packaged with the option connect the option to different drive
models. Select the proper ground wire depending on drive size. Refer to
ground wire selection by drive model.
Figure 7
V1000
Figure 7 Connect the Ground Wire on an IP20/Open-Chassis Drive
Ground Wire Length
mm (in)
150 (5.9)
YASKAWA ELECTRIC TOBP C730600 59A V1000 Option Modbus TCP/IP Installation Manual
Figure 6 Remove the Terminal Cover and Bottom Cover
2A0008B to 2A0069B; 4A0001B to 4A0038B)
Ground terminal
Ground wire
Table 6 Ground Wire Selection
Single-Phase
200 V Class
BA0001
BA0002
BA0003
5 Installation Procedure
Option unit
connector
Screw size: M3
Ground wire
Drive Model
CIMR-V
Three-Phase
200 V Class
2A0001
2A0002
2A0004
2A0006
Bottom Cover
Table 6 on page 19 for
Drive-side
connector
Screw size:
M3.5 to M6
Three-Phase
400 V Class
–
EN 19