Ringing On Wireless Headsets; Accessing The Features Screen - Avaya 9608 User Manual

Navigating the deskphone
Note:
The 9621G deskphone does not support button modules.
Procedure
To use a feature button on a button module, press the button next to the feature you want to
activate. Depending on your button module model, the LED associated with the feature you
select lights up to indicate that the feature is active.

Ringing on wireless headsets

For an incoming call, you can set the ringing tone on the wireless headset instead of the speaker of
the deskphone.
Note:
This feature is available only if your administrator has configured the feature for your deskphone.
When you go off-hook with the headset or change from a non-headset device to the headset, phone
activates the wireless headset. When you go on-hook with an activated headset or change from
wireless headset device to non-headset, the phone deactivates the wireless headset.
When an incoming call arrives:
• If the deskphone is in an idle mode, you hear a ringing tone in the wireless headset.
• If the phone is already in a headset call, you hear a short beep in the wireless headset.

Accessing the Features screen

About this task
Use this task to gain access to the Features screen.
For models with LEDs, the LED next to the feature name indicates if the feature is currently on or
off. If the light is on, the feature is on.
Procedure
1. On the Phone screen, use the right navigation button to gain access to the Features screen.
To return to the main Phone screen, press Phone or scroll to the left.
2. Scroll down to see the features that have been administered for your extension.
The green LED next to the Feature button indicates if the feature is currently on or off. If the
light is on, the feature is on. The red LED next to the Feature button blinks while the feature
label is displayed on the screen.
Using Avaya IP Deskphone 9608, 9608G, 9611G, 9621G, and 9641G H.323 in the Call Center
26
Comments? infodev@avaya.com
June 2014