Activating Ec500 For Simultaneous Ringing On Multiple Phones - Avaya J189 Using Manual

to a number which is set by your system administrator. If the SAC feature is administered on your
phone, a Send All softkey appears on the Phone screen for idle calls.
Pressing Send All turns Send All Calls on. If it is already on, pressing Send All turns it off.
You can also turn Send All Calls on or off by using the phone Features list.
Note:
Do not enable the SAC feature in case you selected the cover all option for the coverage path.
Enabling both features at the same time can cause duplicate entries in the call log.
Procedure
1. Navigate to the Features screen.
2. Scroll to choose Do not disturb.
Note:
If you want the feature label to read as Send all calls, contact your administrator to
relabel the feature name.
3. Press Select or OK or the corresponding line key to activate the feature.
Related links
Call forwarding on page 40
Activating EC500 for simultaneous ringing on multiple
phones
About this task
With the EC500 feature, you can program calls in the way that your desk phone and your cell
phone ring simultaneously when there is an incoming call. Using this feature, you can answer
office calls while you are away from your desk. The system administrator has to add your cell
phone number and program the desk phone.
Procedure
1. From the Phone screen, go to the Features screen.
2. Scroll to EC500, and press Select.
April 2022

Activating EC500 for simultaneous ringing on multiple phones

Using Avaya J189 IP Phone H.323
Comments on this document? infodev@avaya.com
41