Vega VEGABAR 66 Operating Instructions Manual page 44

6 Set up with the indicating and adjustment module PLICSCOM
Menu section
Basic settings
Display
Service
Optional settings
44
Function
Unit of measurement
Temperature unit
Position correction
Lighting
Language
Application
Factory setting
Like basic adjustment, in addition, special parameters are reset to
default values. 9)
Peak value
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
9)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset value
No reset
No reset
No reset
No reset
No reset
No reset
VEGABAR 66 • Foundation Fieldbus