Vega VEGABAR 66 Operating Instructions Manual page 43

Copy sensor data
Reset
Menu section
Basic settings
Display
VEGABAR 66 • Foundation Fieldbus
6 Set up with the indicating and adjustment module PLICSCOM
This function enables reading out parameter adjustment data as well
as writing parameter adjustment data into the sensor via the indicating
and adjustment module. A description of the function is available in the
operating instructions manual "Indicating and adjustment module".
The following data are read out or written with this function:
Measured value presentation
l
Adjustment
l
Damping
l
Linearisation curve
l
Sensor-TAG
l
Displayed value
l
Unit of measurement
l
Language
l
The following safety-relevant data are not read out or written:
PIN
l
Application
l
Copy sensor data
Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
Function
Zero/Min. adjustment
Span/Max. adjustment
Density
Density unit
Damping
Linearisation
Sensor-TAG
Displayed value
The values of the following menu items are not reset with "Reset:
8) Sensor-specific basic adjustment.
8)
Reset value
Measuring range begin
Measuring range end
1 kg/l
kg/l
0 s
Linear
Sensor
AI-Out
43