Mounting Steps, External Housing - Vega VEGABAR 66 Operating Instructions Manual

4 Mounting
Wall mounting
20

4.7 Mounting steps, external housing

1
Mark the holes according to the following drilling template
2
Depending on the mounting surface, fasten the wall mounting
plate with 4 screws
Fig. 11: Drilling template - wall mounting plate
Tip:
Mount the wall mounting plate so that the cable entry of the socket
housing points downward. The socket housing can be displaced by
180° to the wall mounting plate.
Warning:
The four screws of the socket housing must only be hand screwed. A
torque > 5 Nm (3.688 lbf ft) can damage the wall mounting plate.
90 mm (3.54")
70 mm (2.76")
(0.12")
VEGABAR 66 • Foundation Fieldbus
8 mm
(0.32")
3mm