ABB RET670 Installation And Commissioning Manual page 92

Section 8
Set up the PCM600 communication link per IED
86
IEC09000357 V1 EN
Figure 47: Select the TCP/IP protocol and open Properties
4. Select Use the following IP address and define IP address and Subnet mask,
see Figure 48. The IP address must be different from the IP address chosen for
the IED.
IEC09000658 V1 EN
Figure 48: Select: Use the following IP address
5. Use the ping command to verify connectivity with the IED.
6. Close all open windows and start PCM600.
IEC09000357-1-en.vsd
IEC09000658-1-en.vsd
1MRK 504 088-UEN C
Installation and commissioning manual