ASSEMBLY
Tool:
Multi Hex Tool with Phillips
Screwdriver 1PC
Step 9
Assemble Upper Crank Cover A/B
Remove the plastic tape covering the left side Crank (10) and rotate the left side Crank (10) to its
highest position.
Slide one Pedal Cover A (23A) all the way towards the outwards facing side of the left side Crank
(10). Hold one Pedal Cover B (23B) onto the inside of the left Crank (10). Attach the Pedal Cover
A (23A) to Pedal Cover B (23B) with two Round Head Self Tapping Screws (59). Then tighten
the hardware with the Multi Hex Tool with Phillips Screwdriver until they are both firm and
secure.
Repeat the same assembly step for the right side Crank (10).
Note: The Pedal Cover A (23A) will be covering on the outwards on a crank while the Pedal
Cover B (23B) will cover the inside of the crank.
Hardware:
(59) Round Head Self
Tapping Screw
4 PCS
19