Exerpeutic 1317.5-101016 Owner's Manual page 20

ASSEMBLY
Tool:
Multi Hex Tool with Phillips
Screwdriver 1PC
Step 8
Assemble Foot Pedals:
The parts are marked with an "R" for right side and "L" for left side.
Place the Left Foot Pedal (22L) on top of the Left Foot Bar (9L), and align to the holes. Insert two
Carriage Bolts (43) into the aligned holes of the pedal and bar Left Foot Pedal (22L). Secure the
bolts in place using two Washers (46) and two Nylon Locknuts (45). Tighten the bolts with the
Multi-Hex Tool with Phillips Screwdriver provided.
Repeat the same assembly steps to install the Right Foot Pedal (22R) onto the Right Foot Bar
(9R).
Note: There are four holes on the Left Foot Bar (9L) & Right Foot Bar (9R) which allow for two
different positions. Once the machine is completely assembled you can test which positions suit
you best. Both the Left Foot Pedals (22L) & the Right Foot Pedals (22R) should be installed in the
same position on both sides.
Hardware:
(46) Washer
(45) Nylon Locknut
(43) Carriage Bolt
4 PCS
4 PCS
4 PCS
18