ASSEMBLY
Tool:
Multi Hex Tool with Phillips
Screwdriver 1PC
Step 2
2-A Rear Stabilizer Installation
Lift up the front of the Main Frame (1) and align the Rear Stabilizer (2) onto the back curved
bracket. Insert two Carriage Bolts (34) through the stabilizer and the front curved bracket and
secure the bolts using two Washers (36), two Spring Washers (80), and two Cap Nuts (35). Use
the Multi Hex Tool with Phillips Screwdriver provided to tighten the Cap Nuts (35) until they are
firm and secure.
Hardware:
.
(80) Spring Washer
(35) Cap Nut M8
(36) Washer
(34) Carriage Bolt
2 PCS
2 PCS
2 PCS
2 PCS
12