FLUE VENTING
10.
The D-40 Insert must be vented vertically to the outside and must use the Mendota flexible ducting system.
There are two methods for venting Mendota Direct Vent Inserts: 1) Co-Axial and 2) Co-Linear
f i r e - p a r t s . c o m
FIGURE 3
CO-AXIAL VENT KIT (Typically for factory built ZC fireplaces.)
NOTE: THE INSERT IS DESIGNED, TESTED AND LISTED FOR OPERATION ONLY WITH MENDOTA
INSERT VENTING COMPONENTS AS LISTED IN FIGURES 3, 3A, 4 & 4A.
FIGURE 3A
7