Mendota SEABROOK D-40 Installation & Operating Instructions Manual page 25

7. Place left front log "F" as shown in the diagram below. Identify Pin on Log "B" and Hole in Log "F".
Place Log "F" so that the hole in log "F" falls over Pin in log "B", see diagram below. Front right
corner of Log "F" must rest on left-most Log Iron Bar as shown in the next diagram.
f i r e - p a r t s . c o m
Make Certain that the front right corner of Log "F" sits on the left-most Log Iron Bar as Shown in
the diagram, above.
LOG "F" LOCATION
24