Table of Contents
Advertisement
The Mendota Gas Inserts are equipped with hot air dual blowers. A 120-volt electrical service must be
supplied for these blowers at the fireplace at the time of installation.
These specially designed Blower Kits are equipped with heavy duty 1,000° wiring. They include an
automatic snap switch that automatically turns the blowers "On" after heat up (approx. 20 min.) and
"Off" after the unit cools (approx. ½ hr.). A variable speed rheostat is also included that allows the
operator to fully adjust the blower hot air output.
The low profile cross-flow blowers are made of special alloy steel for constant high-speed operation at
high temperatures. Blowers are equipped with long-life, maintenance-free bearings that insure quiet
operation and maximum airflow.
The blowers are ideal for owners who wish to maximize the heating capacity and efficiency of Mendota
Gas Fireplaces. The blowers greatly increase total heating capacity by forcefully moving hot air away
from the fireplace and mantel area and out into the room. The blowers increase the overall efficiency of
the Mendota units by up to 5%.
f i r e - p a r t s . c o m
WARNING: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS.
WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION.
VERIFY OPERATION AFTER SERVICING.
BLOWER OPERATION AND WIRING
FIGURE 13
29
Hide quick links:
Advertisement
Table of Contents
