Table of Contents
Advertisement
19.
Carefully slide the Insert into place in the fireplace opening. At this time, check that Insert is level and
plumb with the fireplace opening and positioned in the middle of the opening. If Insert is unsteady or needs
leveling, the unit may be leveled by adjusting the four (4) leveling bolts provided within the unit. Leveling
bolts are located inside the Gas Valve/Blower compartment.
f i r e - p a r t s . c o m
20. VENT BOOT ADAPTER INSTALLATION: (SEE FIGS. 7 & 7A)
A. Remove 2 sheet metal screws inside top of firebox at front edge.
B. Remove exhaust baffle by dropping front edge downward and lifting rear edge off ledge. Set
aside baffle for later re-installation.
C. Reach up through firebox opening and pull vent boot adapter downward until threaded rod is
visible.
NOTE: Co-Linear vent boot adapter may be rotated 360ºas required.
21. FINAL VENT BOOT ADAPTER INSTALLATION
CO-LINEAR
CO-AXIAL
FIGURES 7
Baffle
Exhaust
11
Hide quick links:
Advertisement
Table of Contents
