Table of Contents
Advertisement
2.
Place Log "A" between Rear Brick Panel and rear-most burner tube – centered left to right in
firebox. NOTE: FOR USE WITH NATURAL GAS, SLIDE THIS LOG FORWARD UNTIL FRONT
SURFACE TEXTURE OF LOG TOUCHES THE REAR BURNER LEG. FOR USE WITH LP GAS,
SLIDE TOWARDS THE REAR OF FIREBOX SO THAT THERE IS A ¼" GAP BETWEEN FRONT
SURFACE TEXTURE OF LOG AND THE REAR BURNER LEG.
f i r e - p a r t s . c o m
3. Place Log B between rear-most burner and middle burner tube as shown below. Slide Log "B" to
the right as far as possible. The tilt angle of this log will be fixed in subsequent steps as you install Logs
"F" and "G".
21
Hide quick links:
Advertisement
Table of Contents
