Assembly Instruction - York Fitness 56011 Owner's Manual

assembly instruction

STEP 3
Part No. 21 x 1
ROUND ALLEN HEAD BOLT (M8 X 15MM)
Part No. 27 x 1
FLAT WASHER (ID8.5 X OD13 X T2MM)
Part No. 25 x 1
NYLOC NUT (M8)
Part No. 5 x 1
STOP BRACKET (56 X 20 X T2MM)
STEP 4
1. I nsert two batteries (AA size 1.5V) into the
compartment in the back of the computer.
2. A ttach the bottom console to the main frame and
secure, using 2 x machine screws as shown - (screws
are located on the back side of computer console).
3. C onnect the sensor wire sockets that come out of the
main frame to the computer wire plug on the back of
computer console.
4. A ttach the top computer onto the bottom console
securely.
8
STEP 3
SLIDE ThE SEAT WITh CARRIAGE ONTO ThE RUNNERS
FIRST.
ENSURE ThICKER EDGE OF SEAT ARE FACING TOWARDS
ThE bACK.
MAKE SURE ThE bOLTS AND SEAT STOP bRACKET GOES
ThROUGh ThE LAST hOLE AT ThE END OF ThE MAIN
FRAME.
STEP 4
Part No. 22 x 2
ROUND PHILLIPS HEAD MACHINE SCREW (M5 X 6MM)