Assembly Instruc�Ons - York Fitness Warrior R400 Rower Owner's Manual

Assembly instruc�ons
Care & Maintenance
This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the equipment in a dry
place with as li�le temperature varia�on as possible.
We recommend placing a mat beneath the equipment to protect both the equipment and your flooring.
Always place the equipment in a dry environment.
Use a warm, damp cloth to keep the product clean.
No wet cleaning of electrical components. Unplug before any care and maintenance.
The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. This
includes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels, bearings & connec�on points etc.
Ensure that you inspect the product regularly - at least once a week is recommended.
Ensure that all fixings are �ght before use.
Always replace damaged / worn components with original parts from the manufacturer.
Prepare your work area It is important you assemble the product in a clean and unclu�ered space.
Work with a friend We recommend you have someone assist you with the assembly as some
of the components are quite heavy.
Remove all the parts and lay them out on the floor.
Unpack the carton
Make sure you have the following parts:
1 x1
3 x1
11 x1
9 x1
26 x1
28 x1
www.yorkfitness.com
17 x1
14 L/Rx1
P x1
5