Mcc Ip Router Screens - Paradyne 8540 User Manual

Monitoring the HotWire DSLAM

MCC IP Router Screens

7-12
Use the system information submenu of the IP Router screens to display
read-only system information.
Procedure
To view routing and ARP tables:
1. Follow this menu sequence:
Monitoring IP Router (B-E)
2. The IP Router menu appears. Select the submenu option as shown in
Table 7-5 and press Return.
Table 7-5. IP Router Menu Options (1 of 3)
Routing Table
Displays information and statistics stored in the routing table. Note that routes will
appear only for interfaces that are up. The information and statistics are listed by route
and destination number.
To display information for a specific destination, enter the destination IP address at the
[Destination # or <RET>]: prompt.
The Routing Table displays the following columns of information:
Routing Table Screen
# – Displays the entry number in the routing table. Use this number to specify which
entry you want to display more information.
Destination – Specifies the destination (or source) IP address of the packet.
Subnet Mask – Indicates the associated subnet mask for the specified destination IP
address.
Routes – Number of routes for Destination.
Flags – Identifies the type of route: host, sub (subnetwork), or net (network).
November 1997
B-E-A
8000-A2-GB20-20