Reboot Card (Mcc; Dsl User Accounts - Paradyne 8540 User Manual

Checklist for Setting Up User Accounts on the MCC and DSL Cards

Reboot Card (MCC)

DSL User Accounts

A-2
Use the following checklist to reboot MCC card after changes have been made.
From the MCC Main Menu, select Configuration
(A-A-F).
Enter Y at the yes/no prompt.
At the initial screen display after reboot, press Return.
To verify that a DSLAM system account has been setup, at the prompt:
Enter Operator ID.
Enter Operator Password.
The HotWire Chassis Main Menu is displayed.
Use the following checklist when configuring DSL user accounts (if telneting
directly to the DSL card).
From the DSL Main Menu, select Configuration
(A-D-A).
Enter the login name (up to 15 characters). This field is case sensitive.
Enter the password for this account (up to 15 characters). This field is case
sensitive.
Re-enter the password.
Enter the privilege level (operator for read-only access, administrator for
read/write access).
Enter Y to save changes and Ctrl-z to return to the HotWire Chassis Main
Menu tree.
November 1997
Card Status Card Reset
Users Accounts
8000-A2-GB20-20