Mcc Monitoring Physical Layer Screens - Paradyne 8540 User Manual

MCC Monitoring Physical Layer Screens

8000-A2-GB20-20
Table 7-1. Card Status Options (2 of 2)
Syslog
Displays a timestamp sequential list of operational type errors (such as invalid IP
addresses) by date and error. There is one logged error per line in a downward scrolling
list.
Use the system information submenu of the Physical Layer screens to display
read-only system information about physical ports.
Procedure
To view the active ports list, Ethernet statistics, and HDLC bus statistics:
1. Follow this menu sequence:
Monitoring Physical Layer (B-B)
2. The Physical Layer menu appears. Select the submenu option as shown in
Table 7-2 and press Return.
Table 7-2. Physical Layer Options (1 of 2)
Active List (Active Ports List)
Displays a list of the current status of all the active ports (e1a =Ethernet,
s1b = backplane) in the card, such as the port number, port name, port type, MAC
address, and status of the port (in use or disconnected).
Num – Number of the port.
Name – Name of the port.
Description – Type of port.
MAC Address – MAC address of the active port. (Internal dummy address is used for
non-Ethernet ports.)
Status – In-use or disconnected.
November 1997
Monitoring the HotWire DSLAM
B-A-C
B-B-A
7-3