Paradyne 8540 User Manual page 81

8000-A2-GB20-20
Table 6-5. IP Router Options (2 of 4)
Filter Table
Displays an overview of the various filters that are in the system.
The FIlter Table screen displays the following information:
Line – Sequential number of line.
Filter Name – Name of the IP filter.
# of Static Rules – Number of static routes in filter.
# of Dynamic Rules – Number of dynamic routes in filters.
Reference Count – Number of active interfaces using the filter.
Default Action – Default action for the filter.
On the bottom of this screen, at the Goto Line Number (0 to Add, #to Edit,
-# to Delete) prompt:
Select 0 to add a new filter to existing filters.
Select # to edit existing filters.
Select -# to delete a filter.
The Add or Edit selection takes you to the IP Filter Configuration screen. When you exit
that screen, you return to the Filter Table screen.
November 1997
DSL Card Configuration
A-E-C
6-13