Creating Snmp Community Strings And Authentication Failure Trap - Paradyne 8540 User Manual

Creating SNMP Community Strings and Authentication Failure Trap

8000-A2-GB20-20
Use this procedure to configure SNMP community strings and enable the
Authentication Failure trap mechanism. For additional security, ensure that
source validation is enabled. (See Appendix C,
Features. )
Procedure
To create SNMP community strings and authentication failure trap:
1. Select Configuration
2. Enter values for the following fields and press Return after each entry:
Field
Authentication Failure Trap
Community Name
Access
IP address and port
Input Number
3. Confirm the save and press Ctrl-z to return to the Configuration
menu.
November 1997
Configuring the HotWire DSLAM
Checklist for Setting Up SNMP
SNMP Communities/Traps (A-F-D) .
Description
Determines whether to
send a trap when a
SNMP request
community string does
not match or when the
password for a telnet
session is incorrect.
SNMP community
string name.
Permission that is
granted for each
community.
NMS system host IP
address
Number of port.
Input
Enable/Disable
Up to four unique
community names per
screen
RO = Read Only
RW = Read/Write
NA = No Access
nnn.nnn.nnn.nnn
format
Default = 162
SNMP
4-9