Configuring the HotWire DSLAM
Creating Default Route or Source Route on the DSL
4-18
Use this procedure to create a default route or source route for each DSL card
(upstream direction). You can create up to 16 default or source routes per DSL
card.
Procedure
To create default routes or source routes on the DSL:
1. Select Configuration
2. Press Return on the Item 0 field to add a new record.
3. Enter values for the following fields and press Return after each entry.
Field
Host/Net
Subnet Mask
Next Hop
Pref (Preference)
S/D (Source/Destination)
PA (Proxy ARP)
4. Confirm the save and press Ctrl-z to return to the Configuration
menu.
November 1997
IP Router
Static_Routes (A-E-A).
Description
Destination of the route.
Associated subnet mask
for the specified
destination IP address.
IP address of the next hop
device for the specified
destination.
Measure of how preferable
one route is to another, if
you have two routes going
to the same destination.
(The lower the number, the
more preferable the route.)
This route is compared to
other routes for the same
destination address.
Source or destination route
type.
Router answers ARP
requests intended for
another machine.
Input
0.0.0.0 to indicate the
default route
nnn.nnn.nnn.nnn format
nnn.nnn.nnn.nnn format
1
Default = Dst
Default = No
IP Router
8000-A2-GB20-20