Accessing The Hotwire - Dsl Menu And Selecting A Specific Dsl Card; Exiting From The System; Manually Logging Off; Automatically Logging Off - Paradyne 8540 User Manual

HotWire Menus and Screens
Accessing the HotWire – DSL Menu and Selecting a Specific DSL Card

Exiting From the System

Manually Logging Off

Automatically Logging Off

2-16
Procedure
To access the HotWire – DSL menu:
1. From the HotWire Chassis Main Menu, select Card Selection.
The Card Selection screen appears.
2. Verify that the DSL card you want to access appears on the Card Selection
screen. (See Card Selection Screen
3. At the Goto Card (MCC or DSLnn): prompt, enter DSL and the number
of the slot. Then, press Return. For example, if you want to configure the DSL
card in Slot 13, enter DSL13 or 13.
The HotWire – DSL menu appears.
You can manually log out of the system or, after five minutes of inactivity, the
system will automatically log you out.
Procedure
To exit from the HotWire DSLAM system:
1. Return to the HotWire Chassis Main Menu by selecting Exit from either the
HotWire – MCC menu or the HotWire – DSL menu.
The HotWire Chassis Main Menu appears.
2. From the HotWire Chassis Main Menu, select Logout.
The system exits from the current login session on the HotWire DSLAM.
The DSLAM system has an automatic timeout feature that logs you out of the
system after five minutes of inactivity. You will need to log back in to continue
your work.
To log back in, press Return to display the Operator Login screen and log in.
November 1997
on page 2-14 for more information.)
8000-A2-GB20-20