Count; Delay - Agilent Technologies Agilent E1412A User Manual

:COUNt?

Example

:DELay

Parameters
Comments
Example
Chapter 3
TRIGger:COUNt? [MIN|MAX]
buffer:
•
The present trigger count (1 through 50,000) if
•
The minimum trigger count available (1) if
•
The maximum trigger count available (50,000) if
Query the Trigger Count
TRIG:COUN 10
TRIG:COUN?
enter statement
seconds
TRIGger:DELay <
the start of the measurement. NOTE: This delay also occurs between each sample
when
SAMP:COUN > 1
Parameter Name Parameter Type
seconds
< >
•
selects the minimum delay of 0 seconds for all functions.
MIN
maximum delay of 3600 seconds for all functions.
•
The trigger delay is inserted between the trigger and each measurement.
•
If a trigger delay is specified using the
TRIGger:DELay:AUTO
•
The multimeter selects an automatic delay if you do not specify a trigger delay
(see the
TRIGger:DELay:AUTO
•
*RST Condition:
Set the Trigger Delay
TRIG:DEL .002
returns one of the following numbers to the output
Multimeter will accept 10 triggers.
Query multimeter to return trigger count.
Enter value into computer.
sets the delay time between receipt of the trigger and
>
. See page 45 for a triggering process diagram.
Range of Values
numeric 0 through 3600|MIN|MAX
TRIG:DEL <
is turned OFF .
command on page 158).
TRIGger:DELay:AUTO ON
Wait 2ms between trigger and start of
measurement.
Multimeter Command Reference
or are not specified.
MIN MAX
is specified.
MIN
is specified.
MAX
Default Units
MAX
period ,
>
seconds
selects the
157