Current:ac:resolution - Agilent Technologies Agilent E1412A User Manual

CURRent:AC:RESolution

Parameters
Comments
CURRent:AC:RESolution?
Example
Chapter 3
[SENSe:]CURRent:AC:RESolution <
current measurements. See Table 3-5 on page 71.
Parameter Name Parameter Type
resolution
< >
•
selects the best resolution (the smallest value) for the selected range.
MINimum
MAXimum selects the worst resolution (the largest value) for the selected
range.
•
You must select a range using
resolution. Also, only specify a resolution when making measurements on a
fixed range. Otherwise, the resolution will change to correspond with the range
selected during autoranging.
•
Specify resolution in the same units as the measurement function.
•
If autoranging is required, set the resolution using the
[SENSe:]CURRent:AC:RESolution? [MIN|MAX]
numbers to the output buffer:
•
The present current resolution selected if
•
The minimum current resolution available if
•
The maximum current resolution available if
Query the AC Current Measurement Range
CURR:AC:RES 1E-4
CURR:AC:RES?
enter statement
resolution
Range of Values
numeric
resolution|
CURRent:AC:RANGe
MIN
Select 100 A resolution
Query multimeter to return the present
resolution.
Enter value into computer.
Multimeter Command Reference
> selects the resolution for AC
Default Units
MIN|MAX
before specifying
or parameter.
MIN MAX
returns one of the following
or MAX is not specified.
MIN is specified.
MAX is specified.
amps
121