FUTABA 4pls Instruction Manual page 56

THR (Throttle Speed)
Sudden throttle trigger operation on a slippery
road only causes the wheels to spin and the ve-
hicle cannot accelerate smoothly. Setting the
throttle speed function reduces wasteful battery
consumption while at the same time permitting
smooth, enjoyable operation.
Operation
-Throttle servo (ESC) operation is delayed so that the drive
wheels will not spin even if the trottle trigger is operated
more than necessary.
This delay function is not performed when the throttle trig-
ger is returned and at brake operation.
Throttle Speed adjustment
(Preparation)
- On the SPEED screen make the following adjustments:
1
(Delay adjustment)
On the SPEED screen, Select the setting item
THR "TURN" by the (JOG) button up or down
operation and use the (+) or (-) buttons to ad-
just the delay amount.
2
When ending, return to the MENU1 screen by pressing the
(JOG) button.
Dial / Trim Setting
The throttle speed adjustment can be controlled with digital dial or digital trim. With
the function select switch dial function. (See page 65)
56
With "SPEED": Quick start without skidding
Without "SPEED": Slow start due to skidding
Servo Speed "SPEED"
neutral
high
Adjustment range
1~100%
At 100%, there is no delay.
1% 100%
Servo operation is delayed.
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.