Xerox Phaser 8400 Service Manual page 101

Error Code Definition Table (Continued)
Error code
37,038.4x - PEST_FAULT_PWR_RESET_DISCONNECT
PEST - The power supply did not reset properly as requested. The reset line may not be
connected.
37,039.4x - PEST_FAULT_PWR_P5_0_OVER
PEST - Power Supply +5.0 OVER LIMIT
37,040.4x - PEST_FAULT_PWR_P5_0_UNDER
PEST - Power Supply +5.0 UNDER LIMIT
37,41.4x - PEST_FAULT_PWR_P1_8_OVER
PEST - Power Supply +1.8 OVER LIMIT
37,042.4x - PEST_FAULT_PWR_P1_8_UNDER
PEST - Power Supply +1.8 UNDER LIMIT
37,043.4x - PEST_FAULT_PWR_P2_5_OVER
PEST - Power Supply +2.5 OVER LIMIT
37,044.4x - PEST_FAULT_PWR_P2_5_UNDER
PEST - Power Supply +2.5 UNDER LIMIT
37,045.4x - PEST_FAULT_PWR_P3_3_OVER
PEST - Power Supply +3.3 OVER LIMIT
37,046.4x - PEST_FAULT_PWR_P3_3_UNDER
PEST - Power Supply +3.3 UNDER LIMIT
37,047.4x - PEST_FAULT_PWR_P12_OVER
PEST - Power Supply +12 OVER LIMIT
37,048.4x - PEST_FAULT_PWR_P12_UNDER
PEST - Power Supply +12 UNDER LIMIT
37,049.4x - PEST_FAULT_PWR_N12_OVER
PEST - Power Supply -12 OVER LIMIT
37,050.4x - PEST_FAULT_PWR_N12_UNDER
PEST - Power Supply -12 UNDER LIMIT
37,051.4x - PEST_FAULT_PWR_CURRENT_OVER
PEST - Power Supply Current Detect OVER LIMIT
37,052.4x - PEST_FAULT_PWR_CURRENT_UNDER
PEST - Power Supply Current Detect UNDER LIMIT
37,053.4x - PEST_FAULT_PWR_P50_OVER
PEST - Power Supply +50 OVER LIMIT
37,054.4x - PEST_FAULT_PWR_P50_UNDER
PEST - Power Supply +50 UNDER LIMIT
37,055.4x - PEST_FAULT_PWR_N50_OVER
PEST - Power Supply -50 OVER LIMIT
37,056.4x - PEST_FAULT_PWR_N50_UNDER
PEST - Power Supply -50 UNDER LIMIT
37,057.4x - PEST_FAULT_PWR_P15_OVER
PEST - Power Supply +15 OVER LIMIT
37,058.4x - PEST_FAULT_PWR_P15_UNDER
PEST - Power Supply +15 UNDER LIMIT
37,059.4x - PEST_FAULT_PWR_N15_OVER
PEST - Power Supply -15 OVER LIMIT
37,060.4x - PEST_FAULT_PWR_N15_UNDER
PEST - Power Supply -15 UNDER LIMIT
Service Manual
Definition
1. Run the Voltages check test.
2. Replace the electronics module.
3-33