Xerox Phaser 8400 Service Manual page 279

8.
Insert a T-20 Torxbit through the slotted hole in the Transfix Load Module,
engage the hole on the back of the module, and lever the module's spring cam
toward the center of the printer to release/unhook the spring hooks from the
Transfix Load Arms. Slowly relax the lever to return the spring cam to the
relaxed position.
Caution
Ensure that you lever the spring cam towards the center. Applying the
pressure in the wrong direction can damage the Transfix Load Module.
9. Remove the clevis pins (1) securing the Transfix Load Arms (2) to the chassis,
and remove the Transfix Load Arms and Transfix Roller.
Service Manual
1
s8400-074
2
Add
grease
s8400-125
8-27