Baud Rate Configuration - HP StorageWorks M2402 User Manual

Serial/Telnet User Interface

Baud Rate Configuration

In the Configuration Menu, select Baud Rate Configuration (1) to change the
baud rate used on the serial port (see
Figure 69: Baud Rate Configuration menu
To change the baud rate enter the number (1 through 5) that represents the desired
rate.
Note:
Note:
124
The asterisk (*) symbol indicates the current setting for the baud rate.
If the Autobaud feature is being used, it is not necessary to set a baud rate.
Figure 69).
Network Storage Router M2402 User Guide