Modules Configuration - HP StorageWorks M2402 User Manual

Modules Configuration

In the Configuration Menu, Modules Configuration (4) is used to configure the
Fibre Channel and SCSI modules (see
Figure 72: Module Configuration menu
The preliminary screen display lists the current settings for Module 0, which is the
left-most module on the back of the router.
To scroll through modules 0, 1, 2, and-3, press Enter.
To configure the selected module, select Configure Module Settings (1).
Different sets of sub-screens are displayed for Fibre Channel and SCSI modules.
This section is further subdivided into the following sections:
Network Storage Router M2402 User Guide
Configuring Fibre Channel Modules
Configuring SCSI Modules
Serial/Telnet User Interface
Figure 72).
129