Configuring Scsi Modules - HP StorageWorks M2402 User Manual

Serial/Telnet User Interface

Configuring SCSI Modules

When a SCSI module is selected in the Module Configuration Menu, the SCSI
Configuration Menu is displayed (see
Figure 74: SCSI Configuration menu
Current settings for the selected SCSI bus are displayed.
SCSI Configuration Menu options:
134
— Toggle Fibre Channel Link Garbage Deletion (4) changes the Fibre
Channel Link garbage deletion. Options include Enabled and Disabled.
<Enter> scrolls to the next port on this module.
Edit Initiator and Target Settings (1) changes the SCSI Initiator and Target
settings.
Caution: If these configuration settings are incorrectly set, processing
difficulties may occur. Before changing these settings, evaluate the need for
the change and verify the desired setting. HP recommends backing up the
router configuration to an external file before making changes to this setting.
Figure 74).
Network Storage Router M2402 User Guide