Installation
Front of Inner
Rail
Figure 14: Separating the inner and outer rails
4. Attach the front-end and back-end of each outer-rail assembly to the rack.
Note:
Figure 15: Aligning the bracket face with the rack
38
View From
Opposite Side
3
2
Spring Latch
1
Circular Grasping Hole
d. Repeat Step 3 to separate the other set of rails.
a. Determine the location in the rack for the router.
The size of the router and its rail assembly is 1U.
b. Align the three screw-holes on the front-end of the outer-rail assembly
with the equally spaced holes on the front of the rack. All three holes must
be aligned exactly. If the holes do not exactly match up, the outer-rail
assembly is not positioned correctly on the rack (see
Extension
Bracket
Front of Outer
Rail
Network Storage Router M2402 User Guide
Figure
15).