Verifying Serial Port Configuration - HP StorageWorks M2402 User Manual

Verifying Serial Port Configuration

Verify the configuration of the terminal or terminal emulation program.
Table 5: Terminal Emulation Configuration Settings
BAUD Rate
Data Bits
Stop Bit
Parity
Flow Control
If problems persist, verify the cabling.
If a valid Ethernet IP address is configured, serial configuration settings can also
be set via Telnet.
Verifying PRLI Data
The router returns the PRLI (preliminary login) response data as specified in
Table
In the default configuration, the router returns PRLI Data (PRLI Accept Payload)
with the Target bit SET and the Initiator bit CLEAR. However, some
configurations require the Initiator bit be SET, such as in router-to-router
configurations. See the FC configuration sections of
User Interface," or
Table 6: PRLI Data
PRLI Command Code
Page Length
Payload Length
Type Code
Type Code Extension
OPA
RPA
Network Storage Router M2402 User Guide
Item
6.
Chapter
Item
Autobaud, 9600, 19200, 38400, 57600,
115200
8
1
None
XON/XOFF
5, "Serial/Telnet User Interface," for information.
0x20
0x10
0x10
0x8
0x0
0x0
0x0
Basic Troubleshooting
Setting
Chapter 4, "Visual Manager
Value
205