Serial Port - HP StorageWorks M2402 User Manual

Introduction
Ethernet port LED definition:
Standby power button LED definition:
Note:
power modules. This button does not remove power to the power module(s). To remove
power to the power module(s), unplug the router from electrical source.
The standby power button has a 10-second delay after disengaging power before
power can be re-engaged.

Serial Port

The router is equipped with one serial port (see
The serial port can be used to access the serial/Telnet user interface, which is used
to locally manage and configure the router.
Figure 8: Serial port
28
Activity - Port activity
Link - Valid Ethernet link
Green - System power is on
Amber - System fault condition is indicated
Alternating Green/Amber - System in Beaconing mode
The Standby Power button engages/disengages system power supplied from the
Figure 8).
Network Storage Router M2402 User Guide