HP StorageWorks M2402 User Manual page 61

Home page information includes:
Figure 28: HP logo
Figure 29: Back view of the router
Network Storage Router M2402 User Guide
The HP logo is located in the upper left corner of the page.
example of this portion of the home page screen. If the Internet is accessible
to the host, click the HP logo to open the router company website.
A back view of the router is located near the top of the home page
(see Figure 29).
The router image is interactive, allowing quick access to configuration menus:
— To display current settings and status for a module, click the
corresponding module shown in the router image.
— To open a menu for making changes to the configuration for that
particular port or bus, click the desired FC port or SCSI bus.
— To open the Power Supply Configuration menu, click the power connector
image.
— To open the Network Configuration menu, click the Ethernet port.
— To open the Beacon settings menu, click the System Status LED indicator.
Router status information is located in the body of the home page and
includes:
— Platform information
— Temperature measurements
— The home page monitors the temperature of the router, checking every 60
seconds. If the detected temperature is outside the operating range, a
pop-up notification message indicates that the unit is about to shut down.
Visual Manager User Interface
Figure 28 is an
67