Baud Rate Configuration - HP M2402 User Manual

Baud Rate Configuration

In the Configuration Menu, select Baud Rate configuration (1) to change the
baud rate used on the serial port.
Configuration menu.
Figure 71: Baud Rate Configuration menu
To change the baud rate enter the number (1 through 5) that represents the desired
rate.
Note:
Note:
Network Storage Router M2402 User Guide
The asterisk (*) symbol indicates the current setting for the baud rate.
If the Autobaud feature is being used, it is not necessary to set a baud rate.
Figure 71 is an illustration of the Baud Rate
Serial/Telnet User Interface
113