Setting Up Serial Port Communications - HP StorageWorks M2402 User Manual

Installation

Setting up Serial Port Communications

To set up serial port communications:
1. Connect the serial cable between the host computer serial port (COM1 or
2. Power on the router.
3. Power on the server.
4. Start the host terminal or terminal interface program (Microsoft Windows 9x,
5. Set the terminal or terminal interface program to use the appropriate COM
6. Configure the selected COM port.
7. Press Enter several times. The router will automatically detect the baud rate
Note:
initialization information may not be visible on screen.
Note:
19200, 38400, 57600, or 115200 to use the autobaud feature.
52
COM2) and the router serial port.
Windows NT 4.0, or Windows 2000 HyperTerminal).
port.
being used. The baud rate will be retained through future power cycles.
This process can take up to 90 seconds. The Power On Self Test (POST) and
The baud rate in the terminal emulation program must be set at 9600,
Network Storage Router M2402 User Guide